User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
65
Chassis Fan 1-3 Max. Duty Cycle (%)
Set the maximum fan/pump duty cycle of the assigned fan/pump for when the source
temp. reaches the upper limit. We suggest raising your fan/pump duty to 100% if your
CPU temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty. Use the <+> or <-> keys to adjust the fan/
pump maximum duty cycle.
Chassis Fan 1-3 Middle Temperature
Configure the fan/pump middle temperature to make assigned fan/pump operate at the
mid. duty cycle when the source temperature is higher than the limit. We suggest raising
your fan/pump duty to 100% if your CPU temperature exceeds 75°C. Please be noted
CPU performance will throttle due to overheating with inefficient fan/pump duty. Use the
<+> or <-> keys to adjust the middle temperature.
Chassis Fan 1-3 Middle. Duty Cycle (%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the source temp.
exceeds the middle temperature. We suggest raising your fan/pump duty to 100% if your
CPU temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty. Use the <+> or <-> keys to adjust the fan/
pump middle duty cycle.
Chassis Fan 1-3 Lower Temperature
Configure the fan/pump lower temperature to make assigned fan/pump operate at the
min. duty cycle when the source temperature is lower than the limit. We suggest raising
your fan/pump duty to 100% if your CPU temperature exceeds 75°C. Please be noted
CPU performance will throttle due to overheating with inefficient fan/pump duty. Use the
<+> or <-> keys to adjust the lower temperature.
Chassis Fan 1-3 Min. Duty Cycle(%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the source temp.
is lower than the lower temperature. We suggest raising your fan/pump duty to 100% if
your CPU temperature exceeds 75°C. Please be noted CPU performance will throttle due
to overheating with inefficient fan/pump duty. Use the <+> or <-> keys to adjust the fan/
pump minimum duty cycle.
Allow Fan Stop
This function allows the fan to run at 0% duty cycle when the temperature of the source is
dropped below the lower temperature.
Configuration options: [Disabled] [Enabled]
Water Pump+ Q-Fan Control
Allows you to set the Water Pump+ operating mode.
[Auto Detect] Detects the type of installed fan/pump and automatically switches
the control modes.
[DC Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/pump.
[PWM Mode] Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
Water Pump+ Profile
Allows you to set the appropriate performance level of the assigned fan/pump. When
selecting [Manual], we suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]