User Manual

Pro WS W680-ACE Series BIOS Manual
59
SlimSAS Configuration
[SATA mode] Only supports SlimSAS SATA devices.
[PCIE mode] Only supports SlimSAS PCIE devices.
U32G2_C1 Type C Power Mode
[Auto] Power will be provided to USB 3.2 Gen 2 Type-C ports automatically when
a device is detected.
[Enabled] Power will always be on for USB 3.2 Gen 2 Type-C ports.
Improper connection may damage the system permanently.
GNA Device
Configuration options: [Enabled] [Disabled]
Serial Port Configuration
This submenu allows you to set parameters for Serial Port.
Serial Port
Configuration options: [Enabled] [Disabled]
The following item appears only when Serial Port is set to [Enabled].
Change settings
Allows you to select an optimal setting for super IO device.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
Parallel Port Configuration
This submenu allows you to set parameters for Parallel Port (LPT/LPTE).
Parallel Port
Configuration options: [Disabled] [Enabled]
The following item appears only when Parallel Port is set to [Enabled].
Change settings
Allows you to select an optimal setting for super IO device.
Configuration options: [Auto] [IO=378h; IRQ=5] [IO=378h; IRQ=5,6,7,9,10,11,12]
[IO=278h; IRQ=5,6,7,9,10,11,12]
Device Mode
Allows you to change the Printer Port mode.
Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode]
[EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP-1.9 Mode]
[ECP and EPP-1.7 Mode]