User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
57
7.17 HDD/SSD SMART Information
The items in this menu allow you to view the SMART information for connected storage
devices.
The options displayed in this menu may vary depending on the devices connected to your
motherboard. Please refer to the BIOS of your motherboard for the actual settings and
options.
NVM Express devices do not support SMART information.
Restore AC Power Loss
Allows your system to go to ON state, OFF state, or both states after an AC power loss.
When setting your system to [Last State], it goes to the previous state before the AC power
loss.
Configuration options: [Power Off] [Power On] [Last State]
Max Power Saving
Configuration options: [Disabled] [Enabled]
ErP Ready
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options are switched off. RGB LEDs and
RGB/Addressable RGB Headers will also be disabled.
Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)]
Power On By PCI-E
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or
other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
7.18 APM Configuration
The items in this menu allow you to change the advanced power management settings.