User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
49
Windows 10 Thunderbolt Support
Allows you to specify Windows 10 Thunderbolt support level.
[Enable + RTD3] OS Native support plus RTD3.
[Disabled] No OS native support.
DTBT Controller 0 Configuration
DTBT Contorller 0
Configuration options: [Disabled] [Enabled]
TBT Host Router
Allows you to enable host router based on ports available.
Configuration options: [One Port] [Two Port]
Extra Bus Reserved
Allows you to select the TBT Root Port Type.
[56] One port Host.
[106] Two port Host.
Reserved Memory
Allows you to set the Reserved Memory for this Root Bridge. Use the <+> and <-> keys
to adjust the value.
Configuration options: [1] - [4096]
Memory alignment
Allows you to set the memory alignment bits. Use the <+> and <-> keys to adjust the
value.
Configuration options: [0] - [31]
Reserved PMemory
Allows you to set the Reserved Prefetchable Memory for this Root Bridge. Use the <+>
and <-> keys to adjust the value.
Configuration options: [1] - [4096]
PMemory alignment
Allows you to set the PMemory alignment bits. Use the <+> and <-> keys to adjust the
value.
Configuration options: [0] - [31]
Reserved I/O
Use the <+> and <-> keys to adjust the value. Use the <+> and <-> keys to adjust the
value. The values range from 0 to 60 with an interval of 4.
Configuration options: [0] - [60]