User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
48
Pro WS W680-ACE Series BIOS Manual
OCR Https Boot
Allows you to enable or disable One Click Recovery Https Boot.
Configuration options: [Disabled] [Enabled]
OCR PBA Boot
Allows you to enable or disable One Click Recovery PBA Boot.
Configuration options: [Disabled] [Enabled]
OCR Windows Recovery Boot
Allows you to enable or disable One Click Recovery Windows Recovery Boot.
Configuration options: [Disabled] [Enabled]
OCR Disable Secure Boot
Allows CSME to request Secure Boot to be disabled for One Click Recovery.
Configuration options: [Disabled] [Enabled]
7.8 Thunderbolt(TM) Configuration
The items in this menu allow you to configure Thunderbolt settings.
PCIE Tunneling over USB4
Allows you to enable or disable PCIE Tunneling over USB4.
Configuration options: [Disabled] [Enabled]
Discrete Thunderbolt(TM) Support
Allows you to enable or disable Discrete Thunderbolt(TM) Support.
Configuration options: [Disabled] [Enabled]
• Please set Control Iommu Pre-boot Behavior in the System Agent(SA) Configuration
page to [Enabled] to support DMA Protection Feature.
• The following items appear only when Discrete Thunderbolt(TM) Support is set to
[Enabled].
Wake From Thunderbolt(TM) Devices
Allows you to enable or disable system wake from Thunderbolt(TM) devices.
Configuration options: [Disabled] [Enabled]
Discrete Thunderbolt(TM) Configuration
The items in this submenu allow you to configure Discrete Thunderbolt(TM) related
configurations.
DTBT Go2Sx Command
Allows you to enable the command to put DTBT into Sx state while system is going
into Sx.
Configuration options: [Disabled] [Enabled]