User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
46
Pro WS W680-ACE Series BIOS Manual
SATA6G_1 - SATA6G_4
Allows you to enable or disable the selected port.
Configuration options: [Disabled] [Enabled]
SATA6G_1 - SATA6G_4 Hot Plug
Designates this port as Hot Pluggable.
Configuration options: [Disabled] [Enabled]
7.6 PCH-FW Configuration
The items in this menu allows you to configure the firmware TPM.
PTT
Allows you to enable or disable PTT in SkuMgr.
Configuration options: [Disable] [Enable]
Extend CSME Measurement to TPM-PCR
Allows you to enable or disable Extend CSME Measurements to TPM-PCR[0] and AMR
Config to TPM-PCR[1].
Configuration options: [Disabled] [Enabled]
7.7 AMT Configuration
The items in this menu allow you to configure Intel(R) Active Management Technology
parameters.
USB Provisioning of AMT
Allows you to enable or disable AMT USB provisioning.
Configuration options: [Disabled] [Enabled]
MAC Pass Through
Allows you to enable or disable MAC Pass Through function.
Configuration options: [Disabled] [Enabled]