User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
41
Slow Slew Rate for GT Domain
Set VR GT Slow Slew Rate for Deep Package C State ramp time; Slow slew rate equals
to Fast divided by number, the number is 2, 4, 8 to slow down the slew rate to help
minimize acoustic noise.
Configuration options: [Fast/2] [Fast/4] [Fast/8]
CPU C-states
Allows you to enable or disable CPU Power Management. Allows CPU to go to C
states when it’s not 100% utilized.
Configuration options: [Auto] [Disabled] [Enabled]
The following items appear only when CPU C-states is set to [Enabled].
Enhanced C-States
Allows you to enable or disable C1E. When enabled, CPU will switch to minimum
speed when all cores enter C-State.
Configuration options: [Enabled] [Disabled]
Package C State Limit
Allows you to set the C-state limit for the CPU package. Setting to [CPU Default]
will leave it as the Factory default value. Setting to [Auto] will initialize the deepest
available Package C State Limit.
Configuration options: [C0/C1] [C2] [C3] [C6] [C7] [C7s] [C8] [C9] [C10] [CPU Default]
[Auto]
Thermal Monitor
Allows you to enable or disable the Thermal Monitor.
Configuration options: [Disabled] [Enabled]
Dual Tau Boost
Allows you to enable Dual Tau Boost feature. This is only applicable for Desktop
35W/65W/125W sku. When DPTF is enabled this feature is ignored.
Configuration options: [Disabled] [Enabled]