User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
33
BCLK TSC HW Fixup
Allows you to enable or disable BCLK TSC HW Fixup disable during TSC copy from
PMA to APIC.
Configuration options: [Enabled] [Disabled]
FLL OC mode
Configuration options: [Auto] [Disabled] [Normal] [Elevated] [Extreme Elevated]
UnderVolt Protection
When UnderVolt Protection is enabled, user will not be able to program under voltage
in OS runtime. Recommended to keep it enabled by default.
[Disabled] No UnderVolt Protection in Runtime.
[Enabled] Allow BIOS undervolting, but enable UnderVolt Protection in
Runtime.
Core PLL Voltage
Allows you to configure the offset for the Core PLL VCC Trim. The values range from
0.900V to 1.845V with an interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
GT PLL Voltage
Allows you to configure the offset for the GT PLL VCC Trim. The values range from
0.900V to 1.845V with an interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
Ring PLL Voltage
Allows you to configure the offset for the Ring PLL VCC Trim. The values range from
0.900V to 1.845V with an interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
System Agent PLL Voltage
Allows you to configure the offset for the System Agent PLL VCC Trim. The values
range from 0.900V to 1.845V with an interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
Memory Controller PLL Voltage
Allows you to configure the offset for the Memory Controller PLL VCC Trim. The
values range from 0.900V to 1.845V with an interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
CPU 1.8V Small Rail
Allows you to configure the voltage for the CPU 1.8V Small Rail. The values range
from 1.500V to 2.300V with an interval of 0.010V.
Configuration options: [Auto] [1.50000] - [2.30000]
PLL Termination Voltage
Allows you to configure the voltage for the PLL Termination. The values range from
0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000V] - [1.80000V]
CPU Standby Voltage
Allows you to configure the voltage for the CPU Standby. Use the <+> and <-> keys to
adjust the value. The values range from 0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000] - [1.80000]