User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
30
Pro WS W680-ACE Series BIOS Manual
CPU Input Boot Voltage
Allows you to set the CPU Input Voltage at initial boot up. Use the <+> or <-> to adjust
the value. The values range from 1.500V to 2.100V with an interval of 0.010V.
Configuration options: [Auto] [1.50000] - [2.10000]
PLL Termination Boot Voltage
Allows you to set the PLL Termination voltage at initial boot up. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000] - [1.80000]
CPU Standby Boot Voltage
Allows you to set the CPU Standby voltage at initial bootup. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000] - [1.80000]
Memory Controller Boot Voltage
Allows you to set the Memory Controller voltage at initial bootup. Use the <+> or
<-> to adjust the value. The values range from 1.000V to 2.000V with an interval of
0.00625V.
Configuration options: [Auto] [1.00000] - [2.00000]
Auto Voltage Caps
CPU Core Auto Voltage Cap
Setting this to a specific value will set a ceiling for CPU Core Auto Voltage. When not
in manual mode, it’s effectiveness is subject to other factors such as AC/DC Loadline
values and CPU’s native VID. Use the <+> or <-> to adjust the value. The values
range from 0.600V to 1.700V with an interval of 0.005V.
Configuration options: [Auto] [0.60000] - [1.70000]
CPU Input Auto Voltage Cap
Setting this to a specific value will set a ceiling for CPU Input Auto Voltage. Use the
<+> or <-> to adjust the value. The values range from 1.500V to 2.100V with an
interval of 0.010V.
Configuration options: [Auto] [1.50000] - [2.10000]
Memory Controller Auto Voltage Cap
Setting this to a specific value will set a ceiling for Memory Controller Auto Voltage.
Use the <+> or <-> to adjust the value. The values range from 1.000V to 2.000V with
an interval of 0.00625V.
Configuration options: [Auto] [1.00000] - [2.00000]
Internal CPU Power Management
The items in this submenu allow you to set the CPU ratio and features.
Tcc Activation Offset
Offse from factory set Tcc activation temperature at which the Thermal Control Circuit
must be activated. Tcc will be activated at: Tcc Activation Temp - Tcc Activation
Offset. Use the <+> or <-> to adjust the value.
Configuration options: [Auto] [0] - [63]
IVR Transmitter VDDQ ICCMAX
Configuration options: [Auto] [0] - [15]