User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
25
tPPD
Configuration options: [Auto] [0] - [15]
tCCD_L_tDLLK
Configuration options: [Auto] [0] - [15]
Misc.
MRC Fast Boot
Allows you to enable or disable the MRC fast boot.
Configuration options: [Disabled] [Enabled]
MCH Full Check
Enable this item to enhance the system stability. Setting this item to [Disabled] may
enhance the DRAM overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]
Mem Over Clock Fail Count
Configuration options: [Auto] [1] - [254]
Training Profile
Allows you to select the DIMM training profile.
Configuration options: [Auto] [Standard Profile] [ASUS User Profile]
RxDfe
Allows you to set the DFE on SOC Rx.
Configuration options: [Auto] [Enabled] [Disabled]
Mrc Training Loop Count
Allows you to set the exponential number of loops to run the test.
Configuration options: [Auto] [0] - [32]
DRAM CLK Period
Allows you to set the DRAM clock period.
Configuration options: [Auto] [0] - [161]
Dll_bwsel
Try range of 22+ for OC.
Configuration options: [Auto] [0] - [63]
Controller 0, Channel 0 Control
Allows you to enable or disable Controller 0, Channel 0.
Configuration options: [Enabled] [Disabled]
Controller 0, Channel 1 Control
Allows you to enable or disable Controller 0, Channel 1.
Configuration options: [Enabled] [Disabled]
Controller 1, Channel 0 Control
Allows you to enable or disable Controller 1, Channel 0.
Configuration options: [Enabled] [Disabled]
Controller 1, Channel 1 Control
Allows you to enable or disable Controller 1, Channel 1.
Configuration options: [Enabled] [Disabled]