User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
21
Early Read Timing Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Write Timing Centering 1D
Configuration options: [Disabled] [Enabled]
Write Voltage Centering 1D
Configuration options: [Auto] [Disabled] [Enabled]
Read Timing Centering 1D
Configuration options: [Auto] [Disabled] [Enabled]
Read Timing Centering with JR
Configuration options: [Auto] [Disabled] [Enabled]
Dimm ODT Training*
Configuration options: [Auto] [Disabled] [Enabled]
Max RTT_WR
Allows you to cap the maximum RTT_WR in power training.
Configuration options: [ODT OFF] [120 Ohms]
DIMM RON Training*
Configuration options: [Auto] [Disabled] [Enabled]
Write Drive Strength/Equalization 2D*
Configuration options: [Auto] [Disabled] [Enabled]
Write Slew Rate Training*
Configuration options: [Auto] [Disabled] [Enabled]
Read ODT Training*
Configuration options: [Auto] [Disabled] [Enabled]
Comp Optimization Training
Configuration options: [Auto] [Disabled] [Enabled]
Read Equalization Training*
Configuration options: [Auto] [Disabled] [Enabled]
Read Amplifier Training*
Configuration options: [Auto] [Disabled] [Enabled]
Write Timing Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Read Timing Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Command Voltage Centering
Configuration options: [Auto] [Disabled] [Enabled]
Early Command Voltage Centering
Configuration options: [Auto] [Disabled] [Enabled]
Write Voltage Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Read Voltage Centering 2D
Configuration options: [Auto] [Disabled] [Enabled]
Late Command Training
Configuration options: [Disabled] [Enabled] [Auto]