User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
16
Pro WS W680-ACE Series BIOS Manual
DRAM Frequency
Allows you to set the memory operating frequency. The configurable options vary with the
BCLK (base clock) frequency setting. Select the auto mode to apply the optimized setting.
Configuration options: [Auto] [DDR5-800MHz] - [DDR5-13333MHz]
The configuration options for this item vary depending on the DIMM model you installed on
the motherboard.
The frequency ratios in grey are not recommended, use BCLK + ratios in white to reach
your target frequency if needed.
Performance Core Ratio
[Auto] The system will adjust all Performance core ratios automatically.
[Sync All Cores] Configure a core ratio limit to synchronize all Performance cores.
[By Core Usage] Configure the ratio limits for active cores depending on how many
Performance cores are being utilized.
The following item appears only when Performance Core Ratio is set to [Sync All
Cores].
ALL-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually assign a Core ratio
limit to synchronize all cores. Use the <+> or <-> to adjust the value.
Configuration options: [Auto] [8] - [45]
The following items appear only when Performance Core Ratio is set to [By Core
Usage].
1-Core Ratio Limit / 2-Core Ratio Limit / 3-Core Ratio Limit / 4-Core Ratio
Limit / 5-Core Ratio Limit / 6-Core Ratio Limit / 7-Core Ratio Limit / 8-Core
Ratio Limit
The N-core ratio limit must be higher than or equal to the (N+1)-core ratio limit. (N stands for
the number of CPU cores) The core ratio limit cannot be set to [Auto] when the core number
is lower than N. The biggest core’s ratio limit must be lower than or equal to the second
biggest core’s ratio limit. Use the <+> or <-> to adjust the value.
Configuration options: [Auto] [21] - [49]
Efficient Core Ratio
[Auto] The system will adjust all Efficient core ratios automatically.
[Sync All Cores] Configure a core ratio limit to synchronize all Efficient cores.
[By Core Usage] Configure the ratio limits for active cores depending on how many Efficient
cores are being utilized.
The following item appears only when Efficient Core Ratio is set to [Sync All Cores].