User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Platform Misc Configuration
- 7.2 CPU Configuration
- 7.3 System Agent (SA) Configuration
- 7.4 PCH Configuration
- 7.5 PCH Storage Configuration
- 7.6 PCH-FW Configuration
- 7.7 AMT Configuration
- 7.8 Thunderbolt(TM) Configuration
- 7.9 Trusted Computing
- 7.10 Redfish Host Interface Settings
- 7.11 Serial Port Console Redirection
- 7.12 Intel TXT Information
- 7.13 PCI Subsystem Settings
- 7.14 USB Configuration
- 7.15 Network Stack Configuration
- 7.16 NVMe Configuration
- 7.17 HDD/SSD SMART Information
- 7.18 APM Configuration
- 7.19 Onboard Devices Configuration
- 7.20 Intel(R) Rapid Storage Technology
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. IPMI menu
- 12. Exit menu
Pro WS W680-ACE Series BIOS Manual
15
The following item appears only when Ai Overclock Tuner is set to [AEMP].
AEMP
Allows you to select your ASUS Enhanced Memory Profile (AEMP). Each profile has its own
DRAM frequency, timing and voltage.
The following item appears only when Ai Overclock Tuner is set to [XMP I] or [XMP II].
XMP
Allows you to select your XMP Profile. Each profile has its own DRAM frequency, timing and
voltage.
Intel(R) Adaptive Boost Technology
Allows you to enable or disable IABT to improve performance by allowing higher multi-core
turbo frequencies. Operating within system power and temperature specifications when
current, power and thermal headroom exists, please ensure quality cooling for the CPU
before enabling the ABT function.
Configuration options: [Auto] [Disabled] [Enabled]
ASUS Performance Enhancement 3.0
[Disabled] Keep to Intel default settings (Intel stock CPU core
frequency and power limits).
[Enabled] Enable ASUS optimized CPU settings (unlock
power limits to increase CPU performance).
[Enabled(limit CPU temp. at 90°C)] Enable ASUS optimized CPU settings (unlock
power limits) and limit CPU temperature at 90°C for
better performance balance.
Actual settings may vary depending on different models.
BCLK Frequency : DRAM Frequency Ratio
[Auto] The BCLK frequency to DRAM frequency ratio will be set to the optimized
setting.
[100:133] The BCLK frequency to DRAM frequency ratio will be set to 100:133.
[100:100] The BCLK frequency to DRAM frequency ratio will be set to 100:100.
Memory Controller : DRAM Frequency Ratio
BCLK Frequency: DRAM Frequency Ratio of 100:133 tends to overclock better and 1:2
Memory Controller: DRAM Frequency Ratio only works with even numbered DRAM Ratios
and not odd numbered ratios.
Configuration options: [Auto] [1:1] [1:2] [1:4]