User Manual
Table Of Contents
- About this guide
- Intel® RAID Configuration
- 1. RAID definitions
- 2. Installing storage devices
- 3. Creating a SATA RAID set in UEFI BIOS
- 4. Creating a SATA RAID set in BIOS
- 5. Creating an NVMe RAID set with onboard M.2 modules in UEFI BIOS
- 6. Creating an NVMe RAID set with onboard M.2/PCIe storage modules in BIOS
- 7. Creating an NVMe RAID set with expansion M.2 card in UEFI BIOS
- 8. Creating an NVMe RAID set with expansion M.2 card in BIOS
- 9. Installing the RAID controller driver during Windows® 10 or Windows® 11 OS installation
1-34
Intel
®
RAID Configuration Guide
3. When the Name item is selected, enter a name for the RAID set and press <Enter>.
4. When the RAID Level item is selected, press <Enter> to select the RAID level to
create, and then press <Enter>.
5. When the Enable RAID Spanned over VMD Controllers item is selected, press
<Enter> and select X to enable RAID spanned over VMD controllers. This is for Data
RAID only, boot is not supported.
6. Under Select Disks, press <Enter> and select X for the disks you want to include in
the RAID set.
Only full SATA or full NVMe RAID is supported, different interfaces of RAID cannot be
created, such as half NVMe and half RAID.