User Manual
Table Of Contents
- About this guide
- Intel® RAID Configuration
- 1. RAID definitions
- 2. Installing storage devices
- 3. Creating a SATA RAID set in UEFI BIOS
- 4. Creating a SATA RAID set in BIOS
- 5. Creating an NVMe RAID set with onboard M.2 modules in UEFI BIOS
- 6. Creating an NVMe RAID set with onboard M.2/PCIe storage modules in BIOS
- 7. Creating an NVMe RAID set with expansion M.2 card in UEFI BIOS
- 8. Creating an NVMe RAID set with expansion M.2 card in BIOS
- 9. Installing the RAID controller driver during Windows® 10 or Windows® 11 OS installation
1-32
Intel
®
RAID Configuration Guide
7. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
8. Go to Advanced > Intel(R) Virtual RAID on CPU to display the Intel
®
Virtual RAID on
CPU menu.
5. Go to Advanced > Onboard Devices Configuration.
6. Set the PCIe slot configuration of the slot you installed the expansion M.2 card to
[PCIe Bifurcation Mode].
The PCIe slot configuration option may differ between models, please refer to the actual
BIOS of your motherboard for the correct item.