User Manual
Table Of Contents
- About this guide
- Intel® RAID Configuration
- 1. RAID definitions
- 2. Installing storage devices
- 3. Creating a SATA RAID set in UEFI BIOS
- 4. Creating a SATA RAID set in BIOS
- 5. Creating an NVMe RAID set with onboard M.2 modules in UEFI BIOS
- 6. Creating an NVMe RAID set with onboard M.2/PCIe storage modules in BIOS
- 7. Creating an NVMe RAID set with expansion M.2 card in UEFI BIOS
- 8. Creating an NVMe RAID set with expansion M.2 card in BIOS
- 9. Installing the RAID controller driver during Windows® 10 or Windows® 11 OS installation
1-16
Intel
®
RAID Configuration Guide
4. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
5. Go to Advanced > Intel(R) Rapid Storage Technology to display the Intel
®
Rapid
Storage Technology menu.
5.1 Creating a RAID set
To create a RAID set:
1. From the Intel
®
Rapid Storage Technology menu, select Create RAID Volume.
2. When the Name item is selected, enter a name for the RAID set and press <Enter>.
3. When the RAID Level item is selected, press <Enter> to select the RAID level to
create, and then press <Enter>.
4. Under Select Disks, press <Enter> and select X for the disks you want to include in
the RAID set.
Only full SATA or full NVMe RAID is supported, different interfaces of RAID cannot be
created, such as half NVMe and half RAID.