User Manual
Table Of Contents
- 目錄
- 1. 認識 BIOS 程式
- 2. BIOS 程式設定
- 3. 管理、更新您的 BIOS 程式
- 4. BIOS 選單畫面
- 5. 主選單(Main Menu)
- 6. Ai Tweaker 選單(Ai Tweaker menu)
- 7. 進階選單(Advanced menu)
- 7.1 平台各項設定(Platform Misc Configuration)
- 7.2 CPU 設定(CPU Configuration)
- 7.3 系統代理設定(System Agent Configuration)
- 7.4 PCH 設定(PCH Configuration)
- 7.5 PCH 儲存裝置設定(PCH Storage Configuration)
- 7.6 PCH-FW 設定(PCH-FW Configuration)
- 7.7 AMT 設定(AMT Configuration)
- 7.8 Thunderbolt(TM) 設定(Thunderbolt(TM) Configuration)
- 7.9 Redfish Host 介面設定(Redfish Host Interface Settings)
- 7.10 序列埠控制面板重新定向(Serial Port Console Redirection)
- 7.11 Intel TXT 資訊(Intel TXT Information)
- 7.12 PCI 子系統設定(PCI Subsystem Settings)
- 7.13 USB 設定(USB Configuration)
- 7.14 網路協定堆疊設定(Network Stack Configuration)
- 7.15 NVMe 設定(NVMe Configuration)
- 7.16 HDD/SSD SMART 資訊(HDD/SSD SMART Information)
- 7.17 APM 設定(APM Configuration)
- 7.18 內建裝置設定(OnBoard Devices Configuration)
- 7.19 Intel(R) 快速儲存技術(Intel(R) Rapid Storage Technology)
- 8. 監控選單(Monitor menu)
- 9. 啟動選單(Boot menu)
- 10. 工具選單(Tool menu)
- 11. IPMI 選單(IPMI menu)
- 12. 離開 BIOS 程式(Exit menu)
Pro WS W680-ACE BIOS 使用手冊
13
User Password(設定使用者密碼)
當您設定使用者密碼後,你必需登入您的帳戶才能使用 BIOS 設定程式。User
Password 項目預設值為 [Not Installed]。當您設定密碼之後將顯示為 [Installed]。
請依照以下步驟設定使用者密碼(User Password):
1. 請選擇 User Password 項目並按下 <Enter>。
2. 由 Create New Password 視窗輸入欲設定的密碼,輸入完成時,請按下
<Enter>。
3. 請再一次輸入密碼並選擇 OK。
請依照以下步驟變更使用者密碼(User Password):
1. 請選擇 User Password 項目並按下 <Enter>。
2. 由 Enter Current Password 視窗輸入密碼並按下 <Enter>。
3. 由 Create New Password 視窗輸入新密碼,輸入完成按下 <Enter>。
4. 請再一次輸入密碼並選擇 OK。
欲刪除使用者密碼時,請依照變更使用者密碼之步驟,但請在輸入/確認密碼視
窗出現時選擇 OK。當您刪除使用者密碼後,User Password 項目將顯示為 [Not
Installed]。