User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
91
The following item appears only when xGMI Max Link Width Control is set to [Manual].
xGMI Max Link Width
[Auto] Use default settings.
[0] Set max xGMI link width to x8.
[1] Set max xGMI link width to x16.
APBDIS
[Auto] Use default settings.
[0] Not APBDIS (mission mode)
[1] APBDIS
Power Profile Selection
Configuration options: [High Performance Mode] [Efficiency Mode] [Maximum IO
Performance Mode]
BoostFmaxEn
[Auto] Use the default Fmax.
[Manual] User can set the boost Fmax.
The following item appears only when BoostFmaxEn is set to [Manual].
BoostFmax
Allows you to specify the boost Fmax frequency limit to apply to all cores (MHz).
Configuration options: [0] - [9999]
DF PState Frequency Optimizer
Configuration options: [Auto] [Enabled] [Disabled]
DF PState Latency Optimizer
Configuration options: [Auto] [Enabled] [Disabled]
DF Cstates
Allows you to enable or disable DF C-states.
Configuration options: [Disabled] [Enabled] [Auto]
CPPC
Configuration options: [Disabled] [Enabled] [Auto]
CPPC Preferred Cores
[Auto] Use default settings.
[Enabled] CPPC highest capability register of each thread will have a different
value to express the AMD recommended scheduling order to OS.
CPPC must be enabled for this parameter to have effect.
[Disabled] Does not declare AMD preferred scheduling order to OS.
HSMP Support
This option allows you to enable or disable HSMP support.
Configuration options: [Disabled] [Enabled] [Auto]
SVI3 SVC Speed Control
Configuration options: [Auto] [Manual]
The following item appears only when SVI3 SVC Speed Control is set to [Manual].
SVI3 SVC Speed
Configuration options: [50.00MHz] [40.00MHz] [26.67MHz] [20.00MHz] [16.00MHz]
[13.33MHz] [10.00MHz] [8.00MHz] [5.00MHz]