User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
90
Pro WS sTR5 Series BIOS Manual
TjMax Control
[Auto] Use the fused TjMax.
[Manual] User can set customized TjMax.
The following item appears only when TjMax Control is set to [Manual].
TjMax
Allows you to set the TjMax [C] (Used for thermal throttling).
Determinism Control
[Auto] Use default performance determinism settings.
[Manual] User can set customize performance determinism settings.
The following item appears only when Determinism Control is set to [Manual].
Determinism Enable
Configuration options: [disable performance determinism] [enable performance
determinism]
Thermal Control
[Auto] Use the default TctlMax.
[Manual] User can set customized TctlMax.
The following item appears only when Thermal Control is set to [Manual].
TjMax
Allows you to set the maximum operating temperature [‘C] (IRM limit will be enforced).
xGMI Link Width Control
[Auto] Use default xGMI link width controller settings.
[Manual] User can set custom xGMI link width controller settings.
The following items appear only when xGMI Link Width Control is set to [Manual].
xGMI Force Link Width Control
[Auto] Use default settings.
[Unforce] Do not force the xGMI to a fixed width.
[Force] Force the xGMI link to the user specified width.
The following item appears only when xGMI Force Link Width Control is set to [Force].
xGMI Force Link Width
[Auto] Use default settings.
[0] Force xGMI link width to x2.
[1] Force xGMI link width to x8.
xGMI Max Link Width Control
[Auto] Use default xGMI max supported link width.
[Manual] User can set custom xGMI max link width.