User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
89
CV test
Set this to [Enabled] to support running PCIECV tool. Selecting [Auto] will preserve h/w
defaults.
Configuration options: [Auto] [Enabled] [Disabled]
SEV-SNP Support
Allows you to enable or disable support for Secure Encrypted Virtualization and Secure
Nested Paging.
Configuration options: [Disable] [Enable]
Allow Compliance
When enabled, allows the PCIe RP to enter Polling.Compliance state.
Configuration options: [Auto] [Disable] [Enable]
SRIS
Configuration options: [Auto] [Disable] [Enable]
Multi Upstream Auto Speed Change
Defines the setting of this feature for all PCIe devices. When this option is set to [Auto],
the DXIO default setting of 0 for Gen1 and 1 for Gen2/3.
Configuration options: [Disabled] [Enabled] [Auto]
Multi Auto Speed Change on Last Rate
Force PCIe link training speed to last advertised for all ports.
[Disabled] Use highest data rate ever advertised.
[Enabled] Use last data rate advertised.
[Auto] Use default settings.
RTM Margining Support
Configuration options: [Auto] [Enable] [Disable]
NBIO NBIF AZ
Configuration options: [Disabled] [Enabled] [Auto]
PCIe loopback Mode
Allows you to enable or disable PcieLoopBackMode.
Configuration options: [Auto] [Disabled] [Enabled]
SMU Common Options
TDP Control
[Auto] Use the fused TDP.
[Manual] User can set customized TDP.
The following item appears only when TDP Control is set to [Manual].
TDP
Allows you to set the sustained power limit [W].
PPT Control
[Auto] Use the fused PPT.
[Manual] User can set customized PPT.
The following item appears only when PPT Control is set to [Manual].
PPT
Allows you to set the PPT [W].