User Manual

88
Pro WS sTR5 Series BIOS Manual
System Hub Watchdog Timer
This value specifies the timer interval of the SYSHUB Watchdog Timer in
milliseconds.
SLink Read Response OK
This value specifies whether SLINK read response errors are converted to
an Okay response. When this value is set to TRUE, read response errors are
converted to Okay responses with data of all FFs. When set to FALSE, read
response errors are not converted.
Configuration options: [Enabled] [Disabled]
SLink Read Response Error Handling
This value specifies whether SLINK write response errors are converted
to an Okay response. When this value is set to 0, write response errors
will be logged in the MCA. When set to 1, write response errors will trigger
an MCOMMIT error. When this value is set to 2, write response errors are
converted to Okay responses.
Configuration options: [Enabled] [Trigger MCOMMIT Error] [Log Errors in MCA]
Log Poison Data from SLINK
This value specifies whether poison data propagated from SLINK will generate
a deferred error. When this value is set to TRUE, deferred errors are enabled.
When set to FALSE, errors are not generated.
Configuration options: [Enabled] [Disabled]
PCIe Aer Reporting Mechanism
This value selects the method of reporting AER errors from PCI Express. A
value of 1 allows OS First handling of the errors through generation of a system
control interrupt (SCI). A value of 2 allows Firmware First handling of the errors
through generation of a system management interrupt (SMI).
Configuration options: [Firmware First] [OS First] [Auto]
Edpc Control
Configuration options: [Disabled] [Enabled] [Auto]
ACS RAS Request Value
Configuration options: [Direct Request Access Enabled] [Request Blocking
Enabled] [Request Redirect Enabled] [Auto]
NBIO Poison Consumption
Configuration options: [Auto] [Enabled] [Disabled]
Sync Flood on PCIe Fatal Error
Configuration options: [Auto] [True] [False]
Enable AER Cap
Allows you to enable or disable Advanced Error Reporting Capability.
Configuration options: [Enable] [Disabled] [Auto]
Early Link Speed
Allows you to set Early Link Speed.
Configuration options: [Auto] [Gen1] [Gen2]
Hot Plug Handling mode
Allows you to control the Hot Plug Handling mode.
Configuration options: [OS First] [Firmware First] [System Firmware Intermediary] [Auto]
Presence Detect Select mode
Allows you to control the Presence Detect Select mode.
Configuration options: [OR] [AND] [Auto]
Data Link Feature Cap
Allows you to set Data Link Feature Capability.
Configuration options: [Enabled] [Disabled] [Auto]