User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
86
Pro WS sTR5 Series BIOS Manual
DDR Training Options
This item allows you to configure DDR Training Options.
DRAM PDA Enumerate ID Programming
Specify PDA Enumeration mode
[Auto] Default setting.
[Toggling PDA enumeration mode] Continuous DQS toggling PDA
enumeration mode (default).
[Legacy PDA enumeration mode] Legacy PDA enumeration mode.
DFE Read Training
Perform 2D Read Training with DFE on.
Configuration options: [Auto] [Enable] [Disable]
DDR Security
This item allows you to configure DDR Security.
TSME
Configuration options: [Auto] [Enabled] [Disabled]
AES
Configuration options: [AES-128] [AES-256]
Data Scramble
Configuration options: [Enabled] [Disabled] [Auto]
DDR Memory Features
This item allows you to configure DDR Memory Features.
Memory Context Restore
Allows you to configure the memory context restore mode. When enabled,
DRAM re-training is avoided when possible and the POST latency is
minimized.
Configuration options: [Auto] [Enabled] [Disabled]
DDR PHY Configuration
This item allows you to configure DDR PHY configurations.
DDR PHY PLL Bypass
Configuration options: [Auto] [Enabled] [Disabled]
DDR PHY PLL Bypass Frequency
[Auto] Default settings.
[DDR-2000] Enable PLL bypass for DDR-2000 and below.
[DDR-2400] Enable PLL bypass for DDR-2400 and below.
NBIO Common Options
IOMMU
Configuration options: [Disabled] [Enabled] [Auto]
The following items appear only when IOMMU is set to [Enabled].
Pre-boot DMA Protection
Allows you to enable or disable DMAr system protection during POST.
Configuration options: [Disabled] [Enabled] [Auto]
Kernal DMA Protection Indicator
Allows you to enable or disable DMA remap support in IVRS IVinfo Field.
Configuration options: [Disabled] [Enabled] [Auto]
DRTM Virtual Device Support
Configuration options: [Disabled] [Enabled] [Auto]