User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
84
Pro WS sTR5 Series BIOS Manual
TrdrdSc Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdSc Ctrl is set to [Manual].
TrdrdSc
Specifies the Read to Read turnaround timing in the same chipselect.
Valid values: 0x1 - 0xF.
TrdrdSd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdSd Ctrl is set to [Manual].
TrdrdSd
Specifies the Read to Read turnaround timing in the same DIMM.
Valid values: 0x1 - 0xF.
TrdrdDd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrdrdDd Ctrl is set to [Manual].
TrdrdDd
Specifies the Read to Read turnaround timing in a different DIMM.
Valid values: 0x1 - 0xF.
TwrwrScL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwrwrScL Ctrl is set to [Manual].
TwrwrScL
Specifies the CAS to CAS Delay Time, same bank group. Valid
values: 3Fh - 1h.
TwrwrSc Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwrwrSc Ctrl is set to [Manual].
TwrwrSc
Specifies the Write to Write turnaround timing in the same chipselect.
Valid values: 0x1 - 0xF.
TwrwrSd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.