User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
82
Pro WS sTR5 Series BIOS Manual
Trfc1 Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trfc1 Ctrl is set to [Manual].
Trfc1
Specifies the Refresh Recovery Delay Time (tRFC1). Valid values:
3DEh - 3Ch.
Trfc2 Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trfc2 Ctrl is set to [Manual].
Trfc2
Specifies the Refresh Recovery Delay Time (tRFC2). Valid values:
3DEh - 3Ch.
TrfcSb Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrfcSb Ctrl is set to [Manual].
TrfcSb
Specifies the Refresh Recovery Delay Time (tRFCSB). Valid values:
0x32 - 0x7FF. The value is in hex.
Non-SPD Timing
Tcwl Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Tcwl Ctrl is set to [Manual].
Tcwl
Specifies the CAS Write Latency. Valid values: 0x9 - 0x16.
Trtp Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trtp Ctrl is set to [Manual].
Trtp
Specifies the Read CAS# to Precharge command delay time. Valid
values: 0x5 - 0x0E.
TrrdL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.