User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
71
REP-MOV/STOS Streaming
Allow REP-MOV/STOS to use non-caching streaming store for large sizes.
Configuration options: [Disabled] [Enabled] [Auto]
Streaming Stores Control
Allows you to enable or disable the streaming stores functionality.
Configuration options: [Disabled] [Enabled] [Auto]
Local APIC MOde
Allows you to select local APIC operation modes.
Configuration options: [Compatibility] [xAPIC] [x2APIC] [Auto]
ACPI _CST C1 Declaration
Determines whether or not to declare the C1 state to the OS.
Configuration options: [Disabled] [Enabled] [Auto]
MCA error thresh enable
Allows you to enable MCA error thresholding.
Configuration options: [False] [True] [Auto]
The following item appears only when MCA error thresh enable is set to [True].
MCA error thresh count
Effective error threshold count = 4095(0xFFF) - <this value> (e.g. the default value of
0xFF5 results in a threshold of 10)
Configuration options: [1] - [4095]
MCA FruText
Allows you to enable MCA FruText.
Configuration options: [False] [True]
SMU and PSP Debug Mode
When this item is set to [Enabled], uncorrected errors detected by the PSP FW or
SMU FW that should cause a cold reset, will hang and not restart the system.
Configuration options: [Disabled] [Enabled] [Auto]
PPIN Opt-in
Allows you to turn on PPIN feature.
Configuration options: [Disabled] [Enabled] [Auto]
SNP Memory (RMP Table) Coverage
When this item is set to [Enabled], the ENTIE system memory is covered.
Configuration options: [Disabled] [Enabled] [Custom] [Auto]
The following item appears only when SNP Memory (RMP Table) Coverage is set to
[Custom].
Amount of Memory to Cover
Specify MB of System Memory to be covered in Hex.
Configuration options: [0] - [100000]
SMEE
Control secure memory enryption enable.
Configuration options: [Disable] [Enable] [Auto]