User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
70
Pro WS sTR5 Series BIOS Manual
Core Watchdog
Core Watchdog Timer Enable
Allows you to enable or disable CPU Watchdog Timer.
Configuration options: [Disabled] [Enabled] [Auto]
The following item appears only when Core Watchdog Timer Enable is set to [Enabled].
Core Watchdog Timer Interval
Allows you to select CPU Watchdog Timer interval.
Configuration options: [Auto] [39.68us] [80.64us] [162.56us] [326.4us] [654.08us]
[1.309ms] [2.620ms] [5.241ms] [10.484ms] [20.970ms] [40.64ms] [82.53ms] [166.37ms]
[334.05ms] [669.41ms] [1.340s] [2.681s] [5.364s]
RedirectForReturnDis
This option is from a workaround for GCC/C000005 issue for XV Core on
CZ A0, setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14
[DecfgNoRdrctForReturns] to 1.
Configuration options: [Auto] [1] [0]
Platform First Error Handling
Allows you to enable or disable PFEH, cloack individual banks, and mask deferred
error interrupts from each bank.
Configuration options: [Enabled] [Disabled] [Auto]
Core Performance Boost
Allows you to disable Core Performance Boost.
Configuration options: [Disabled] [Auto]
Global C-state Control
Allows you to control IO based C-state generation and DF C-states.
Configuration options: [Disabled] [Enabled] [Auto]
PC6
Power Supply Idle Control.
Configuration options: [Low Current Idle] [Typical Current Idle] [Auto]
SEV-ES ASID Space Limit Control [Auto]
Allows you to select SEV-ES ASID Space Limit operation modes.
Configuration options: [Auto] [Manual]
The following item appears only when SEV-ES ASID Space Limit Control is set to
[Manual].
SEV-ES ASID Space Limit
SEV Vms using ASIDs below the SEV-ES ASID Space Limit must enable the SEV-ES
feature. ASIDs from SEV-ES ASID Space Limit to (SEV ASID Count + 1) can only be
used with SEV VMs. If this field is set to (SEV ASID Count + 1), all ASIDs are forced
to be SEV-ES ASIDs. Hence, the valid values for this field is 1 - (SEV ASID Count +
1).
Configuration options: [1] - [520]