User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
61
TwrwrSd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwrwrSd Ctrl is set to [Manual].
TwrwrSd
Specifies the Write to Write turnaround timing in the same DIMM.
Valid values: 0x1 ~ 0xF. The value is in hex.
TwrwrDd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwrwrDd Ctrl is set to [Manual].
TwrwrDd
Specifies the Write to Write turnaround timing in a different DIMM.
Valid values: 0x1 ~ 0xF. The value is in hex.
Twrrd Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Twrrd Ctrl is set to [Manual].
Twrrd
Specifies the Write to Read turnaround timing. Valid values: 0x1 ~
0xF. The value is in hex.
Trdwr Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Trdwr Ctrl is set to [Manual].
Trdwr
Specifies the Read to Write turnaround timing. Valid values: 0x1 ~
0x1F. The value is in hex.
DDR BUS Configuration
Processor CA drive strengths
Specifies the Processor CA drive strengths.
Configuration options: [Auto] [120.0 Ohm] [60.0 Ohm] [40.0 Ohm] [30.0 Ohm]
Processor DQ drive strengths
Specifies the Processor DQ drive strengths.
Configuration options: [Auto] [High Impedance] [240 ohm] [120 ohm] [80 ohm]
[60 ohm] [48 ohm] [40 ohm] [34.3 ohm]
Processor ODT impedance
Specifies the Processor ODT impedance.
Configuration options: [Auto] [High Impedance] [480 ohm] [240 ohm] [160 ohm]
[120 ohm] [96 ohm] [80 ohm] [68.8 ohm] [60 ohm]
Dram DQ drive strengths
Specifies the DRAM DQ drive strengths.
Configuration options: [Auto] [48 ohm] [40 ohm] [34 ohm]