User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
59
TrrdL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrrdL Ctrl is set to [Manual].
TrrdL
Specifies the Activate to Activate Delay Time, same bank group
(tRRD_L). Valid values: 0x4 ~ 0x20. The value is in hex.
TrrdS Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TrrdS Ctrl is set to [Manual].
TrrdS
Specifies the Activate to Activate Delay Time, different bank group
(tRRD_S). Valid values: 0x4 ~ 0x14. The value is in hex.
Tfaw Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when Tfaw Ctrl is set to [Manual].
Tfaw
Specifies the Four Activate Window Time. Valid values: 0x14 ~ 0x50.
The value is in hex.
TwtrL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwtrL Ctrl is set to [Manual].
TwtrL
Specifies the Minimum Write to Read Time, the same bank group.
Valid values: 0x8 ~ 0x30. The value is in hex.
TwtrS Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.
The following item appears only when TwtrS Ctrl is set to [Manual].
TwtrS
Specifies the Minimum Write to Read Time, different bank group.
Valid values: 0x2 ~ 0x10. The value is in hex.
DDR Non-SPD Timing
TrdrdScL Ctrl
[Auto] Follow default setting.
[Manual] Manually specify.