User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
55
GPP0 CCLK/PCIe Base Frequency
Adjust external clock RC2612A, range from 100MHz ~ 140MHz, step 1MHz.
Configuration options: [100] - [140]
ACP Power Gating
Allows you to enable or disable ACP Power Gating.
Configuration options: [Disabled] [Enabled]
ACP Power Gating
Allows you to enable or disable ACP Clock Gating.
Configuration options: [Disabled] [Enabled]
Hotplug support
Allows you to enable or disable Hotplug support.
Configuration options: [Disabled] [Enabled]
PM L1 SS
Allows you to enable PM L1 SS and ASPM L1 SS.
Configuration options: [Disabled] [L1.1] [L1.2] [L1.1_L1.2]
7.18 AMD Overclocking
The items in this menu shows the AMD Overclocking Setup page.
The configuration options for this section vary depending on the motherboard. Please refer
to the BIOS of your motherboard for the actual settings and options.
Damage caused by use of your AMD processor outside of specification or in excess of
factory settings are not covered by your system manufacturers warranty.