User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
49
PCIEX16 Configuration
[PCIE X16 Mode] PCIe slot runs at x16.
[PCIE RAID Mode] Up to 4 SSDs installed onto the Hyper M.2 X16 Series card can
be detected.
Use [PCIE RAID Mode] when installing the Hyper M.2 X16 series card or other M.2
adapter cards. Installing other devices may result in a boot-up failure. The number of
SSDs supported varies with the PCIe bifurcation abilities enabled by each processor.
PCIEX16 Configuration
[PCIE X8 Mode] PCIe slot runs at x8.
[PCIE RAID Mode] Up to 2 SSDs installed onto the Hyper M.2 X16 Series card can
be detected.
Use [PCIE RAID Mode] when installing the Hyper M.2 X16 series card or other M.2
adapter cards. Installing other devices may result in a boot-up failure. The number of
SSDs supported varies with the PCIe bifurcation abilities enabled by each processor.
Serial Port Configuration
This submenu allows you to set parameters for Serial Port.
This item will only function if there is a serial port (COM) connector on your motherboard.
Serial Port
Allows you to enable or disable the Serial port.
Configuration options: [Enabled] [Disabled]
The following item appears only when Serial Port is set to [Enabled].
Change settings
Allows you to select an optimal setting for super IO device.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]
PCIE Link Speed
This submenu allows you to set parameters for PCIE Link Speed.
PCIE Speed Control
Controls the PCIE speed mode for power optimization. This option allows user to
choose between an optimized power consumption and performance-oriented power
settings of a PCIe or M.2 slot.
Configuration options: [Disabled] [Enabled]
PCIEX16 Link Mode
Allows you to set the link speed for this PCIe slot.
Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3] [GEN 4] [GEN 5]