User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
48
Pro WS sTR5 Series BIOS Manual
7.14 Onboard Devices Configuration
The items in this menu allow you to change the onboard devices settings. Scroll down to
view the other BIOS items.
The settings and options of this menu may vary depending on your motherboard. Please
refer to the BIOS of your motherboard for the actual settings and options.
HD Audio Controller
Allows you to enable or disable Azalia HD Audio.
Configuration options: [Disabled] [Enabled]
Onboard X710 LAN Configuration
Allows you to configure onboard X710 LAN configurations.
Intel X710 LAN1 and LAN2
LAN Enable
Allows you to enable or disable onboard LAN.
Configuration options: [Disabled] [LAN1, LAN2 Enabled]
USB power delivery in Soft Off state (S5)
Allows you to enable or disable USB power when your PC is in the S5 state.
Configuration options: [Disabled] [Enabled]
Wi-Fi Controller
Allows you to enable or disable the Wi-Fi Controller.
Configuration options: [Disabled] [Enabled]
Bluetooth Controller
Allows you to enable or disable the Bluetooth Controller.
Configuration options: [Disabled] [Enabled]
Q-Code LED Function
[Disabled] Disable the Q-Code LED.
[POST Code Only] Show POST (Power-On Self-Test) code on Q-Code LED.
[Auto] Automatically display POST (Power-On Self-Test) code and
CPU temperature on Q-Code LED.