User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
45
7.10 NVMe Configuration
This menu displays the NVMe controller and Drive information of the connected devices.
You may press <Enter> on a connected NVMe device which appears in this menu to view
more information on the NVMe device.
The options displayed in this menu may vary depending on the devices connected to your
motherboard. Please refer to the BIOS of your motherboard for the actual settings and
options.
7.11 HDD/SSD SMART Information
The items in this menu allow you to view the SMART information for connected storage
devices.
The options displayed in this menu may vary depending on the devices connected to your
motherboard. Please refer to the BIOS of your motherboard for the actual settings and
options.
NVM Express devices do not support SMART information.