User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
35
The following item appears only when CPU VDDIO is set to [Manual Mode].
VDDIO Override
Use the <+> and <-> keys to adjust the value. The values range from 0.600V to 1.500V with
an interval of 0.005V.
Configuration options: [Auto] [0.60000] - [1.50000]
The following items appear only when CPU VDDIO is set to [Offset Mode].
VDDIO Offset Mode Sign
[+] To offset the CPU VDDIO by a positive value.
[–] To offset the CPU VDDIO by a negative value.
VDDIO Offset
Allows you to configure the input voltage for the CPU by the external voltage regulator. Use
the <+> or <-> to adjust the value. The values range from 0.005V to 0.635V with an interval
of 0.005V.
Configuration options: [Auto] [0.00500] - [0.63500]
VDD_11_S3 / MC Voltage
Configuration options: [Auto] [Manual Mode]
The following item appears only when VDD_11_S3 / MC Voltage is set to [Manual
Mode].
VDD_11_S3 Override
Use the <+> and <-> keys to adjust the value. The values range from 0.6240V to 1.7004V
with an interval of 0.0039V.
Configuration options: [Auto] [0.62400] - [1.70040]
VDDP Voltage
Use the <+> or <-> to adjust the value. The values range from 0.700V to 1.800V with an
interval of 0.001V.
Configuration options: [Auto] [0.70000] - [1.80000]
High DRAM Voltage Mode
If disabled, the upper range for DRAM Voltage will be 1.435V. If enabled, the upper range
will be 2.070V. If enabled on non-supported DRAM, the voltage will be lower than requested.
Configuration options: [Auto] [Disabled] [Enabled]
DRAM VDD Voltage
Allows you to set the power for the DRAM IC’s VDD portion. Use the <+> or <-> to adjust the
value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]