User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
32
Pro WS sTR5 Series BIOS Manual
VDDIO Power Phase Control
Configuration options: [Auto] [Standard] [Extreme] [Manual]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
The following item appears only when VDDIO Power Phase Control is set to [Manual].
Power Phase Response
Select ultra fast mode for a faster power phase response. The reaction time will be
longer when regular mode is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
DRAM Switching Frequency
This item allows you to set the VRM switching frequency. VRM switching frequency
affects transient response and VRM component temperatures. Setting a higher
frequency will result in better transient response at the expense of more switching
noise.
Configuration options: [Auto] [Manual]
The following item appears only when DRAM Switching Frequency is set to [Manual].
Fixed DRAM Switching Frequency (KHz)
The DRAM switching frequency will affect the overclocking range and the system
stability. Configure a higher frequency to increase the overclocking range or a lower
frequency to enhance the system stability. Use the <+> or <-> to adjust the value. The
values range from 500kHz to 800kHz with an interval of 100kHz.
DRAM Power Phase Control
Configuration options: [Auto] [Standard] [Extreme]
Tweaker’s Paradise
Clock Spread Spectrum
Allows you to enable or disable Clock Spread Spectrum.
Configuration options: [Auto] [Enabled] [Disabled]
BCLK1 Amplitude
Allows you to set the signal magnitude of the reference BCLK1 supplied to the
processor. Higher values may improve overclocking stability.
Configuration options: [Auto] [800mV] [900mV]
BCLK1 Slew Rate
The speed at which the base clock rises or falls. Set a high value for overclocking
stability.
Configuration options: [Auto] [Slow] [High]
Chipset1_1.0V
Use the <+> and <-> keys to adjust the value. The values range from 0.800V to
1.400V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.40000]