User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
31
Ceiling Hot Temp
The hottest temperature point that maps to Ceiling Low VMax should the processor
temperature move to hotter or equal to Ceiling Hot Temp. Auto is 88C. Use the <+>
and <-> keys to adjust the value. The values range from 0C to 255C with an interval
of 1C.
Configuration options: [Auto] [0] - [255]
Ceiling High VMax
The highest maximum voltage point that maps to Ceiling Cold Temp should the
processor temperature move to colder or equal to Ceiling Cold Temp. Auto is 1.45V.
Use the <+> and <-> keys to adjust the value. The values range from 0.000V to
1.700V with an interval of 0.00625V.
Configuration options: [Auto] [0.00000] - [1.70000]
Ceiling Cold Temp
The coldest temperature point that maps to Ceiling High VMax should the processor
temperature move to colder or equal to Ceiling Cold Temp. Auto is 65C. Use the <+>
and <-> keys to adjust the value. The values range from 0C to 255C with an interval
of 1C.
Configuration options: [Auto] [0] - [255]
VDDSOC Switching Frequency
Configuration options: [Auto] [Manual]
The following item appears only when VDDSOC Switching Frequency is set to [Manual].
Fixed VDDSOC VRM Switching Frequency(KHz)
Allows you to set a higher frequency for a quicker transient response speed. The
values range from 400 KHz to 700 KHz with an interval of 100 KHz.
VDDSOC Power Phase Control
Configuration options: [Auto] [Standard] [Extreme] [Manual]
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
The following item appears only when VDDSOC Power Phase Control is set to [Manual].
Power Phase Response
Select ultra fast mode for a faster power phase response. The reaction time will be
longer when regular mode is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
VDDIO Switching Frequency
Configuration options: [Auto] [Manual]
The following item appears only when VDDIO Switching Frequency is set to [Manual].
Fixed VDDIO VRM Switching Frequency(KHz)
Allows you to set a higher frequency for a quicker transient response speed. The
values range from 400 KHz to 700 KHz with an interval of 100 KHz.