User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
30
Pro WS sTR5 Series BIOS Manual
The following items appear only when Voltage Floor Mode is set to [Dynamic].
Floor Low VMin
The lowest minimum voltage point that maps to Floor Hot Temp should the processor
temperature move to hotter or equal to Floor Hot Temp. Auto is 1.05V. Use the <+>
and <-> keys to adjust the value. The values range from 0.000V to 1.700V with an
interval of 0.00625V.
Configuration options: [Auto] [0.00000] - [1.70000]
Floor Hot Temp
The hottest temperature point that maps to Floor Low Vmin should the processor
temperature move to hotter or equal to Floor Hot Temp. Auto is 95C. Use the <+> and
<-> keys to adjust the value. The values range from 0C to 255C with an interval of 1C.
Configuration options: [Auto] [0] - [255]
Floor High VMin
The highest minimum voltage point that maps to Floor Cold Temp should the
processor temperature move to colder or equal to Floor Cold Temp. Auto is 1.30V.
Use the <+> and <-> keys to adjust the value. The values range from 0.000V to
1.700V with an interval of 0.00625V.
Configuration options: [Auto] [0.00000] - [1.70000]
Floor Cold Temp
The coldest temperature point that maps to Floor High Vmin should the processor
temperature move to colder or equal to Floor Cold Temp. Auto is 55C. Use the <+>
and <-> keys to adjust the value. The values range from 0C to 255C with an interval
of 1C.
Configuration options: [Auto] [0] - [255]
Voltage Ceiling Mode
[Static] Sets a fixed maximum voltage.
[Dynamic] Sets a customized maximum that actively moves based on CPU
temperature.
The following item appears only when Voltage Ceiling Mode is set to [Static].
Voltage Ceiling
Suppresses output to keep voltage below this level, efficacy up to 0.3V. Use the <+>
and <-> keys to adjust the value. The values range from 0.000V to 1.700V with an
interval of 0.00625V.
Configuration options: [Auto] [0.00000] - [1.70000]
The following items appear only when Voltage Ceiling Mode is set to [Dynamic].
Ceiling Low VMax
The lowest maximum voltage point that maps to Ceiling Hot Temp should the
processor temperature move to hotter or equal to Ceiling Hot Temp. Auto is 1.20V.
Use the <+> and <-> keys to adjust the value. The values range from 0.000V to
1.700V with an interval of 0.00625V.
Configuration options: [Auto] [0.00000] - [1.70000]