User Manual

16
Pro WS sTR5 Series BIOS Manual
BCLK2 Frequency
BCLK2 frequency is only for CPU CLK. Use the <+> or <-> to adjust the value. The values
range from 80.0000 to 1000.0000 with an interval of 0.0500.
Configuration options: [Auto] [80.0000] - [1000.0000]
PCIE Frequency
Adjusts Base Clock Frequency for G-Link. Default is 100. Use the <+> or <-> to adjust the
value. The values range from 80.0000 to 200.0000 with an interval of 0.1000.
Configuration options: [Auto] [80.0000] - [200.0000]
Memory Frequency
Forces a DDR5 frequency slower than the common tCK detected via SPD.
Configuration options: [Auto] [DDR5-2000MHz] - [DDR5-12000MHz]
The configuration options for this item vary depending on the DIMM model you installed
on the motherboard.
FCLK Frequency
Specifies the FCLK frequency.
Configuration options: [Auto] [800MHz] - [3000MHz]
CPU Core Ratio
Configuration options: [Auto] [CPU Core Ratio] [AI Optimized]
The following item appears only when CPU Core Ratio is set to [CPU Core Ratio].
CPU Core Ratio
Allows you to set the CPU core ratio. Use the <+> or <-> to adjust the value. The values
range from 8.00 to 100.00 with an interval of 0.25.
Configuration options: [Auto] [8.00] - [100.00]
CPU Core Ratio (Per CCX)
The sub-items in this menu allow you to adjust Core Ratios for each CCX.
Core VID 0~1
Allows you to specify a custom CPU core VID. Power saving features for idle cores
(e.g. cc6 sleep) remain active.
Configuration options: [Auto] [0.700] - [1.550]
CCD 0
CCX0 Ratio (Rail0)
Allows you to specify a custom Core Ratio for this CCX. Use the <+> or <-> to adjust
the value. The values range from 8.00 to 100.00 with an interval of 0.25.
Configuration options: [Auto] [8.00] - [100.00]
CCD 1
CCX0 Ratio (Rail1)
Allows you to specify a custom Core Ratio for this CCX. Use the <+> or <-> to adjust
the value. The values range from 8.00 to 100.00 with an interval of 0.25.
Configuration options: [Auto] [8.00] - [100.00]