User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
Pro WS sTR5 Series BIOS Manual
15
Ai Overclock Tuner
[Auto] Loads the optimal settings for the system.
[Manual] Allows you to manually assign BCLK (base clock) frequency.
[DOCP I] Load the DIMM’s default DOCP memory timings (CL, TRCD,
TRP, TRAS) and other memory parameters optimized by ASUS.
[DOCP II] Load the DIMM’s complete default DOCP profile.
[DOCP Tweaked] Load DOCP profile with tweaks for improved performance if
config matches.
[EXPO I] Load the DIMM’s default EXPO memory timings (CL, TRCD,
TRP, TRAS) and other memory parameters optimized by ASUS.
[EXPO II] Load the DIMM’s complete default EXPO profile.
[EXPO Tweaked] Load EXPO profile with tweaks for improved performance if
config matches.
• The configuration options for this item depends on the DIMM installed.
• The following item appears only when Ai Overclock Tuner is set to [DOCP I], [DOCP
II], or [DOCP Tweaked].
DOCP
Allows you to select your DOCP Profile. Each profile has its own DRAM frequency, timing
and voltage.
The following item appears only when Ai Overclock Tuner is set to [EXPO I], [EXPO II],
or [EXPO Tweaked].
EXPO
Allows you to select your EXPO Profile. Each profile has its own DRAM frequency, timing
and voltage.
The following items appear only when Ai Overclock Tuner is set to [Manual], [DOCP I],
[DOCP II], [DOCP Tweaked], [EXPO I], [EXPO II], [EXPO Tweaked], or [AEMP]
eCLK Mode
Configuration options: [Auto] [Synchronous mode] [Asynchronous mode]
BCLK1 Frequency
Adjusts Base Clock Frequency for DRAM, PCIE CLK. Default is 100. Use the <+> or <-> to
adjust the value. The values range from 80.0000 to 1000.0000 with an interval of 0.0500.
Configuration options: [Auto] [80.0000] - [1000.0000]
• Changing the BCLK will affect stability of devices, in particular SATA devices.
• The following item appears only when eCLK Mode is set to [Asynchronous mode].