User Manual
Table Of Contents
- 1. Knowing BIOS
- 2. BIOS setup program
- 3. Managing and updating your BIOS
- 4. BIOS menu screen
- 5. Main menu
- 6. Ai Tweaker menu
- 7. Advanced menu
- 7.1 Trusted Computing
- 7.2 AMD fTPM configuration
- 7.3 Redfish Host Interface Settings
- 7.4 UEFI Variables Protection
- 7.5 Serial Port Console Redirection
- 7.6 CPU Configuration
- 7.7 PCI Subsystem Settings
- 7.8 USB Configuration
- 7.9 Network Stack Configuration
- 7.10 NVMe Configuration
- 7.11 HDD/SSD SMART Information
- 7.12 SATA Configuration
- 7.13 APM Configuration
- 7.14 Onboard Devices Configuration
- 7.15 PCIe Redriver Tuning
- 7.16 AMD Mem Configuration Status
- 7.17 AMD PBS
- 7.18 AMD Overclocking
- 7.19 AMD CBS
- 7.20 Third-party UEFI driver configurations
- 8. Monitor menu
- 9. Boot menu
- 10. Tool menu
- 11. Server Mgmt menu
- 12. Exit menu
104
Pro WS sTR5 Series BIOS Manual
11. Server Mgmt menu
The Server Mgmt menu items allow you to configure IPMI settings.
OS Watchdog Timer
When this option is set to [Enabled] it starts a BIOS timer which can only be shut off by
Management Software after the OS loads. Helps determine if the OS successfully loaded or
follows the OS Boot Watchdog Timer policy.
Configuration options: [Enabled] [Disabled]
The following items appear only when OS Watchdog Timer is set to [Enabled].
OS Wtd Timer Timeout
Enter a value between 1 and 30 min for OS Boot Watchdog Expiration, Not available if OS
Boot Watchdog Timer is disabled.
Configuration options: [1] - [30]
OS Wtd Timer Policy
This item allows you to configure the how the system should respond if the OS Boot Watch
Timer expires.
Configuration options: [Do Nothing] [Reset] [Power Down] [Power Cycle]