User Manual

ASUS Pro E800 G4
4-15
4.7.1 PCH Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
PCH SATA Configuration
SATA Controller
Allows you to enable or disable the SATA Controller.
Configuration options: [Disabled] [Enabled]
The following item appears only when SATA Controller is set to [Enabled].
Configure SATA as
Allows you to identify the SATA port connected to Solid State Drive or Hard Disk Drive.
Configuration options: [AHCI] [RAID]
Support Aggressive Link Power Management
Allows you to enable or disable the Support Aggressive Link Power (SALP)
Management.
Configuration options: [Disabled] [Enabled]
4.7 Platform Configuration menu
The IntelRCSetup menu items allow you to change the platform settings.
Take caution when changing the settings of the Platform Configuration menu items.
Incorrect field values can cause the system to malfunction.
4.6.16 Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.
4.6.17 iSCSI Configuration
Allows you to configure the iSCSi parameters.
4.6.15 ASMedia Storage Controller
The items in this menu allow you to configure ASMedia storage controller.
4.6.14 Audio Configuration
The items in this menu allow you to enable or disable the onboard audio.