User Manual
Chapter 2: Hardware Setup
2-2
2.1 Chassis cover
2.1.1 Removing the side covers
• Ensure that you unplug the power cord before removing the side cover.
• Takeextracarewhenremovingthesidecover.Keepyourngersfromcomponents
inside the chassis that can cause injury, such as the CPU fan, rear fan, and other
sharp-edged parts.
• The images of the system shown in this section are for reference purposes only and
may not exactly match the model you purchase.
2.1.2 Replacing the side covers
1. Remove the two (2) screws from the rear of the side cover, then set them aside.
2. Lift the side cover to remove it.
Be careful not to apply pressure to the air vent on the side cover to avoid damages to the
system.
3. Repeat steps 1 and 2 to remove the other side cover.
1. Align and insert the front of the side cover to the front of the chassis, then replace the
side cover onto the chassis.
2. Replace the two (2) removed previously to secure the side cover to the chassis.
3. Repeat steps 1 and 2 to replace the other side cover.