User’s Manual
Graphics Configuration
Allows you to select a primary display from CPU, PCIE and PCI graphical devices.
Primary Display [Auto]
Allows you to select the primary display from CPU, PCIE and PCI graphics devices.
Conguration options: [Auto] [CPU Graphics] [PCIE]
iGPU Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi-monitor output. The CPU graphics shared system memory size is xed at 64 MB.
Conguration options: [Disabled] [Enabled]
DVMT Pre-Allocated [64M]
Allows you to select the DVMT 5.0 pre--allocated (xed) graphics memory size used by
the internal graphics device. Conguration options: [32M] [64M] [96M] [128M] [160M]
[192M] [224M] [256M] [288M] [320M] ~ [512M] [1024M]
RC6(Render Standby) [Enabled]
Allows you to enable or disable render standby support. Conguration options:
[Disabled] [Enabled]
PEG Port Configuration
Allows you to congure the PEG Port settings.
PCIEx16_1 Link Speed [Auto]
Allows you to congure the PCIEx16 speed for slot 1. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
2.6.4 PCH Configuration
This item allows you to congure the PCI Express conguration settings.
PCI Express Configuration
PCIe Speed [Auto]
Allows you to congure the speed for the PCIe slots. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
IOAPIC 24-119 Entries [Enabled]
Allows you to enable or disable IOAPIC 24/119 entries. Conguration options: [Enabled]
[Disabled]
2.6.5 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Conguration options: [Disabled] [Enabled]
The following items appear only when you set the SATA Controller(s) to [Enabled].
2-32 Chapter 2: Getting started