User’s Manual

1-6
• Power Button/Soft-off Button header (PWR_BTN)
The 2 pin header allows you to connect the system power button. Press the power
button to power up the system, or put the system into sleep or soft-off mode
(depending on the operating system settings).
• Reset button header (RESET)
The 2-pin header allows you to connect the chassis-mounted reset button. Press the
reset button to reboot the system.
1.2.2 Rear panel connectors
1
3
7 8
12
2 5 6
10 11
4
9
1. PS/2 Keyboard/Mouse combo port. This port is for a PS/2 keyboard or mouse.
2. 1Gb Ethernet port. This port allows 1Gbps Ethernet Gigabit connection to a Local
Area Network (LAN) through a network hub. Refer to the table below for the Ethernet
port LED indications.
Realtek 1Gb Ethernet port LED indications
ACT/LINK
LED
SPEED
LED
Ethernet port
Speed LED
Status Description
OFF
10Mbps connection
ORANGE
100Mbps connection
GREEN
1Gbps connection
Activity Link LED
Status Description
OFF No link
ORANGE Linked
BLINKING Data activity
3. DisplayPort. This port is for a DisplayPort-compatible device.
4. Serial port connector (COM). This port connects a modem, or other devices that
conform with serial specification.
5. Line In port (light blue). This port connects the tape, CD, DVD player, or other audio
sources.
Chapter 1: Product Introduction