User Guide
2-22
Chapter 2: RAID Conguration
To run a consistency check:
1. In the VD Mgmt screen, navigate to a virtual drive, and press the <F2> key.
2. Navigate to Consistency Check, and press <Enter>.
3. Navigate to Start, and press <Enter>.
4. Press Yes to run the consistency check.
2.2.16 Running a Consistency Check
You should periodically run a consistency check on fault-tolerant virtual drives
(RAID 1, 5, 6, 10, 50, or 60 congurations; RAID 0 does not provide data
redundancy). A consistency check scans the virtual drive to determine whether the
data has become corrupted and needs to be restored.
Make sure to back up the data before you run a consistency check, if you think
the data might be corrupted.