User Guide
2-6
Chapter 2: RAID Conguration
Utility Keystrokes
Keystroke Action
F1 Displays help for the particular screen that you are in.
F2
Displays a list of commands that can be performed for the selected device.
This key stroke is available only in the VD Mgmt, the PD Mgmt, and the
Foreign View menus. The commands that are enabled are highlighted in
white and the disabled commands are highlighted in black.
NOTE: Based on the congurations that you make, commands are enabled
or disabled.
F5 Refreshes the screen that you currently are in.
F11 Switches between controllers.
F12
Displays a list of all the available controllers. You can also scroll to the next
controller.
<Ctrl>+<N> Displays the next menu screen.
<Ctrl>+<P> Displays the previous menu screen
<Ctrl>+<S> shortcut key for the Apply button in the Controller Settings screens.
<Tab> Moves the cursor to the next control.
<Enter>
Lets you to select a menu item, a button, a check box and values in a list
box.
<Esc> Closes a screen or a window. Press Esc twice to exit from the Ctrl-R Utility.
Up Arrow Moves the cursor to the next menu selection.
Down Arrow Moves the cursor to the lower menu items or to a lower level menu.
Right Arrow
Opens a submenu, moves from a menu heading to the rst submenu, or
moves to the rst item in a submenu. The right arrow also closes a menu
list in a popup window.
Left Arrow
Closes a submenu, moves from a menu item to the menu heading or
moves from a sub menu to a higher level menu.
Spacebar Lets you select a menu item, a button and a check box.