User Manual

ASUS PIKE II 3008 Series
2-41
2.3.3 Installing MegaRAID Storage Manager Sofware for
Linux
Follow these steps if you need to install MegaRAID Storage Manager software on a system
running Red Hat Linux or SUSE Linux:
1. Copy the
MSM_linux_installer...tar.gz
le to a temporary folder.
2. Untar the
MSM_linux_installer...tar.gz
le using the following command:
tar -zxvf MSM_linux_installer...tar.gz
A new
disk
directory is created.
3. Go to the new
disk
directory.
4. In the
disk
directory, nd and read the
readme.txt
le.
5. To start the installation, enter the following command:
csh install.sh -a
If you select
Client
installation for a PC used to monitor servers, and if there are no available
servers with a registered framework on the local subnet (that is, servers with a complete
installation of MegaRAID Storage Manager software), the server screen appears. The server
screen does not list any servers. You can use this screen to manage systems remotely.