User Manual
Table Of Contents
2-16
Chapter 2: RAID conguration
2.2.3 RAID 0 volume
The RAID 0 feature supports volumes with two to ten disks. You may combine an RAID 0
volume with an RAID 1 or RAID 1E/10 volume.
3. From the Adapter List screen, select an item and press <Enter>.
The number of items displayed depends on the controller.
To create a RAID 0 volume:
1. Turn on the system after installing all SAS hard disk drives.
2. During POST, press <Ctrl>+<C> to enter the SAS conguration utility.
To avoid data loss, do not turn off the system when rebuilding.