User Manual

2-4
Chapter 2: RAID conguration
3. From the
Adapter List
screen, select the controller and press <Enter>.
The number of items displayed depends on the controller.
2.2.1 RAID 1 volume
The RAID 1 feature supports simultaneous mirrored volumes with two disks.
The RAID 1 feature supports hot swap capability, so when a disk in an RAID 1 volume fails,
you can easily restore the volume, and the swapped disk is automatically re-mirrored.
To create a RAID 1 volume:
1. Turn on the system after installing all SAS hard disk drives.
2. During POST, press <Ctrl>+<C> to enter the SAS conguration utility.
To avoid data loss, do not turn off the system when rebuilding.