User guide

2-30 Chapter 2: RAID conguration

To access servers on a different subnet, type in the box at the bottom of the

screen the IP address of a server in the desired subnet where the MegaRAID

Storage Manager software is running, and click Update. If you check the

Connect to remote server at: IP address box, you can also access a

standalone (remote) installation of MegaRAID Storage Manager software, if it

has a network connection.

3. Double-click the icon of the server that you want to access. The Server Login

window appears, as shown in the following gure.

4. Select an access mode from the drop-down menu.

– Select

Full Access if you need to both view the current conguration

and change the conguration.

– Select

View Only if you need to only view and monitor the conguration.

5. Enter your user name and password, and click

If the computer is networked, this is the login to the computer itself, not the

network login.

You must enter the root/administrator user name and password to use Full

Access mode. If your user name and password are correct for the Login

mode you have chosen, the main MegaRAID Storage Manager window

appears.