Specifications

ASUS TS700-E6/RS8 2-7
2.4 Installing ASUS PIKE SAS RAID card
The ASUS PIKE SAS RAID card allows users to create SAS RAID sets from SAS
hard disk drives connected to the SAS connectors on the motherboard.
Order P/N Description
90-C1SCU0-00UAY00Z PIKE 1068E (8-port SAS support Firmware RAID 0,1,1E)
90-C1SCN5-00UAY00Z
PIKE 1078 (8-port SAS support Hardware RAID
0,1,10,5,50,6,60)
90-C1SDB0-00XBN00Z
(10 in 1)
PIKE 6480 (8-port SAS support Firmware RAID 0,1,10,5)
4. Set the SGPIO_SEL1 jumper on the backplane to pins 2-3 when connecting
data cables to the SAS connectors on the motherboard.
5. Install the i Button*.
* PIKE 1078 module won’t function if the i Button is not installed.
** Ensure to connect the connectors I between the two backplanes when installing
the second HDD cage.
1. Insert the PIKE SAS RAID card into the PIKE card
slot, ensuring that it is completely seated on the
PIKE card slot.
2. Remove the data cables connected to the SATA
connectors on the motherboard.
3. Connect the data cables, by numerial order, to
the SAS connectors labeled SAS5-8 (blue) on the
motherboard.
A
B
C
I
D
F
G
I
H
E
B
A
C
D
F
E
G
H
SGPIO_SEL1
On-Board
12
Add-On Card
23
4
4
4
5
3
2
1